Problems with 180_degree hybrid model

Home › Forums › Bug Reports › Problems with 180_degree hybrid model

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 29. November 2020 at 5:52 #672
    Jess_Stuart
    Participant

      The 180-deg hybrid coupler model included with Qucsstudio does not work correctly.  I’ve included a schematic and a diagram showing the 4 basic configurations in which 180-deg hybrids can be used (which can be verified against component datasheets).

      29. November 2020 at 5:55 #673
      Jess_Stuart
      Participant

        Upload was too big.  Scaled down the image and retried attaching zip file.

        Attachments:
        1. 180deg_hybrid.zip
        29. November 2020 at 17:17 #675
        QucsStudio
        Keymaster

          The 180-deg hybrid coupler works in frequency-domain only. So please use the AC or s-parameter analysis.

          A time-domain model for this component does not exist, because its Fourier transformation has a pole.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.